AS 1273-1991 Unplasticized PVC (UPVC) downpipe and fittings for rainwater
Standards Australia
Supersedes: AS 1273.1-1974 Unplasticized PVC (UPVC) downpipe and fittings for rainwater
Supersedes: AS 1273.2-1974 Unplasticized PVC (UPVC) downpipe and fittings for rainwater
Draft Designation: DR 90101Reconfirmed by: AS 1273-1991 REC:2018 Unplasticized PVC (UPVC) downpipe and fittings for rainwater
This Standard incorporates the content of both AS 1273.1 and AS 1273.2. It is technically equivalent to both these Standards, however the impact test is now carried out at 20°C only.
Reconfirmed: 2018-05-25
First published as AS 1273.1-1974 and AS 1273.2-1974. Revised, amalgamated and redesignated AS 1273-1991.
This Standard specifies requirements for rectangular and circular UPVC downpipe and fittings
for the disposal of rainwater. Such pipes and fittings are suitable for external or internal use above ground where the head of water does not exceed 15 m.
NOTE: Alternative methods for determining compliance with this Standard are given in Appendix A.
Contents:
1: Scope
2: Referenced Documents
3: Definition
4: Classification
5: General Requirements
6: Performance Requirements
7: Marking
Appendix A: Means For Demonstrating Compliance With This Standard
PVC Rainwater Goods.
CSIRO, Division of Building, Construction and Engineering; Local Government Engineers Association of Victoria; The Plastics Industry Association; The University of Melbourne.
