Skip to main content

AS/NZS 4994.2:2023 Temporary edge protection, Part 2: Roof edge protection - Installation and dismantling

Standards Australia/Standards New Zealand

Version:  Third Edition 2023.  (Current)
error_outline
You are currently viewing a preview version of this resource. Sign in or subscribe for full access.
Publication date
11-10-2024
Pages
30
Current status
Current
Supersedes

Supersedes: AS/NZS 4994.2:2009 Temporary edge protection, Part 2: Roof edge protection - Installation and dismantling

Draft Designation: DR AS/NZS 4994.2:2023
Superseded by

Amended by: AS/NZS 4994.2:2023 Amd 1:2024 Temporary edge protection, Part 2: Roof edge protection - Installation and dismantling

Document Number
4994
Description

The objective of this document is to specify requirements and give guidance for the selection, installation, use and dismantling of roof edge protection conforming to AS/NZS 4994.1. It covers temporary roof edge protection for persons working on roofs of buildings having roof slopes of not greater than 35° to the horizontal.

A list of all parts in the AS/NZS 4994 series can be found in the Standards Australia online catalogue.

The major changes in this edition are as follows:

(a) The document scope was revised to align with parts 1 and 3 of this series.
(b) Text was revised in few clauses to ensure clarity.

The terms “normative” and “informative” are used in Standards to define the application of the appendices to which they apply. A “normative” appendix is an integral part of a document, whereas an “informative” appendix is only for information and guidance.

Originated as AS/NZS 4994.2(Int):2004. Third edition 2023.It covers temporary roof edge protection for persons working on roofs of buildings having roof slopes of not greater than 35° to the horizontal Originated as AS/NZS 4994.2(Int):2004. Third edition 2023. Reissued incorporating Amendment No 1 (October 2024).
Committee

Temporary edge protection— Construction practices.

BD-092

Australasian Wire Industry Association; Australian Chamber of Commerce and Industry; Australian Council of Trade Unions (ACTU); Australian Industry Group; Australian Institute of Building Surveyors; Australian Roofing Tile Association; Better Regulation Division (Fair Trading, Safework NSW, Testsafe); Edge Protection New Zealand; Hire and Rental Industry Association of Australia; Housing Industry Association; Master Builders Australia; Master Plumbers Australia and New Zealand; National Edge Protection and Platform Association; Site Safe New Zealand; Victorian WorkCover Authority (WorkSafe Victoria).

ISBN
978 1 76139 426 3
Attribution
Standards Australia/Standards New Zealand 2023.
Licence
© All Rights Reserved
NSW
VIC
QLD
NT
WA
ACT
TAS
SA
Sector
Residential
Civil
Commercial
Industrial
AS/NZS 4994.2:2023 Temporary edge protection, Part 2: Roof edge protection - Installation and dismantling 2023 cover