Skip to main content

AS/NZS 4994.3:2023 Temporary edge protection, Part 3: Installation and dismantling for edges other than roof edges

Standards Australia/Standards New Zealand

Version:  Second Edition 2023.  (Current)
error_outline
You are currently viewing a preview version of this resource. Sign in or subscribe for full access.
Publication date
11-10-2024
Pages
26
Current status
Current
Supersedes

Supersedes: AS/NZS 4994.3:2010 Temporary edge protection, Part 3: Installation and dismantling for edges other than roof edges

Draft Designation: DR AS/NZS 4994.3:2023
Superseded by

Amended by: AS/NZS 4994.3:2023 Amd 1:2024 Temporary edge protection, Part 3: Installation and dismantling for edges other than roof edges

Document Number
4994
Description

The objective of this document is to specify requirements and give guidance for the selection and installation of temporary edge protection conforming to AS/NZS 4994.1, for persons working near an opening in a floor, or near a platform edge, or floor edge, or any edge from which a person could fall prior to the installation of the permanent edge protection.

The major changes in this edition are as follows:

(a) Document was revised in line with the changes to parts 1 and 2.
(b) Edge protection for stepped surfaces was introduced.

The terms “normative” and “informative” are used in Standards to define the application of the appendices to which they apply. A “normative” appendix is an integral part of a Standard, whereas an “informative” appendix is only for information and guidance.

AS/NZS 4994.3:2023 specifies requirements and gives guidance for the selection and installation of edge protection conforming to AS/NZS 4994.1, for persons working near an opening in a floor, or near a platform edge or floor edge prior to the installation of the permanent walling materials. First published as AS/NZS 4994.3:2010. Second edition 2023. Reissued incorporating Amendment No 1 (October 2024).

Scope

Contents:

Section 1: Scope And General
Section 2: Planning
Section 3: Installation, Alteration And Dismantling
Section 4: Configuration
Section 5: Inspection And Handover
Section 6: Maintenance Of Equipment
Section 7: Training
Appendix A (Informative): Handover Certificate

Committee

Temporary edge protection— Construction practices.

BD-092

Australasian Wire Industry Association; Australian Chamber of Commerce and Industry; Australian Council of Trade Unions (ACTU); Australian Industry Group; Australian Institute of Building Surveyors; Australian Roofing Tile Association; Better Regulation Division (Fair Trading, Safework NSW, Testsafe); Edge Protection New Zealand; Hire and Rental Industry Association of Australia; Housing Industry Association; Master Builders Australia; Master Plumbers Australia and New Zealand; National Edge Protection and Platform Association; Site Safe New Zealand; Victorian WorkCover Authority (WorkSafe Victoria).

ISBN
978 1 76139 425 6
Attribution
Standards Australia/Standards New Zealand 2023.
Licence
© All Rights Reserved
NSW
VIC
QLD
NT
WA
ACT
TAS
SA
Sector
Residential
Civil
Commercial
Industrial
AS/NZS 4994.3:2023 Temporary edge protection, Part 3: Installation and dismantling for edges other than roof edges 2023 cover