Search all content

1 - 10 of 283 results
AS/NZS 4505:2012 Garage doors and other large access doors 2012 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2013.  (Current)
Specifies requirements for the design, construction, and installation of garage doors and other large access doors in external walls of buildings.
AS/NZS 3013:2005 Electrical installations - Classification of the fire and mechanical performance of wiring system elements 2005 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2005.  (Current)
Sets out a classification scheme for wiring systems according to their resistance to the hazards of fire and mechanical damage.
AS/NZS 3084:2017 Telecommunications installations - Telecommunications pathways and spaces for commercial buildings 2017 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2017.  (Current)
Provides specific guidance to architects, planners, designers, engineers, builders, installers, maintenance personnel, building owners, managers and users in the planning and installation of physical pathways and spaces in and between buildings to accommodate the equipment and cabling infrastructure necessary for communications; to the extent that this is not adequately covered for Australian and New Zealand purposes in AS/NZSISO/IEC 14763.2:2014.
AS/NZS 1260:2017 PVC-U pipes and fittings for drain, waste and vent applications 2017 cover

Standards Australia/Standards New Zealand

Version:  Fifth Edition 2017.  (Current)
Specifies requirements for PVC-U pipes and fittings for sewer, drain, waste and vent applications above ground or below ground and is intended to be used where the pipeline is operating under gravity flow and the operating pressure is low; includes requirements for both plain and structured wall pipes and fittings.
AS/NZS 3500.1:2021 Amd 1:2022 Plumbing and drainage, Part 1: Water services 2022 cover

Standards Australia/Standards New Zealand

Version:  Fourth Edition 2022.  (Current)
Amendment to AS/NZS 3500.1:2021.
AS/NZS 1664.2:1997 Aluminium structures, Part 2: Allowable stress design 1997 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1997.  (Current)
Specifies requirements for the design of aluminium alloy load-carrying members using the allowable stress design criteria (ASD).
AS/NZS 1720.4:2019 Timber structures, Part 4: Fire resistance of timber elements 2019 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2019.  (Current)
The objective of this Standard is to provide a method for determining the fire resistance for structural adequacy and insulation of sawn timber, timber in pole form, plywood, laminated veneer lumber (LVL), and glued-laminated structural timber elements as an alternative to the test method specified in AS 1530.4.
AS/NZS 1546.1:2008 On-site domestic wastewater treatment units, Part 1: Septic tanks 2008 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2008.  (Current)
AS/NZS 1546.1 specifies performance requirements and performance criteria for septic tanks, technical means of compliance and provides test specifications that enable septic tanks to be manufactured to comply with the performance requirements and performance criteria.
AS/NZS 2269.0:2012 Amd 1:2015 Plywood - Structural, Part 0: Specifications 2015 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2015.  (Current)