Search all content

Provides the procedure for structural design; includes design procedures, reference to design actions (other parts of the series), combinations of actions, detailing for robustness, methods of analysis and methods for confirmation of a limit states design; also covers the use of special studies and experimental testing and, for New Zealand, criteria for selection of annual probability of exceedance.

Provides design values of snow and ice actions for use in structural design; it is intended to be used in conjunction with AS/NZS 1170.0, which gives the procedure for structural design; snow regions are defined and ground snow loads are provided for a range of annual probabilities of exceedance; other factors cover the environment around the structure, the geometry of the structure and the effect of winds on snow distribution.

Specifies materials, design, construction, installation, testing and maintenance requirements for below ground plastics gas distribution networks to be used in conjunction with AS/NZS 4645.1, for the distribution of fuel gas suitable for domestic, commercial or industrial uses.

Sets out minimum requirements for the design of structural members cold-formed to shape from carbon or low-alloy steel sheet, strip, plate or bar not more than 25mm in thickness and used for load-carrying purposes in buildings.

This Amendment applies to the following elements:• Global changes• Clauses 1.1.2, 1.1.3.1, 1.1.3.4, 1.2, 1.3, 1.4, 2.2.1, 2.2.2, 2.2.3, 2.8.1, 2.8.4, 2.8.6, 2.9.1, 2.9.2, 2.9.3, 2.9.4, 2.9.5, 2.9.6, 2.13.3, 2.13.3.1, 2.13.3.2, 3.1.8, 4.2, 5.1.4.1, 5.1.4.2, 5.1.7, 5.2.7.3, 5.2.12.2, 5.2.12.3, 6, 6.1, 6.1.1, 6.1.2, 6.1.3, 6.1.4, 6.3.2, 6.3.3, 6.3.4, 6.3.5, 6.3.6, 6.5, 6.6, 6.7, 6.11.1, 7.1, 7.2, 7.3.1, 7.3.2, 7.4.1, 7.4.3, 8.1, 8.4.1, 9.2, 9.3.2.2, 9.4, 9.7, 9.8, 9.9.1, 9.10.1, 10.3.1, C.4, C.5.2, C.5.4, C.6.4, E.1.1, E.1.2, E.2.1, E.3.2.1, E.3.3.1, H.1, H.2, H.3, L.3.3.4• Figures 3.1.8(E), 7.3.1• Table 5.1.4.3• Bibliography

​Sets out requirements and recommendations for the safe storage and handling of LP Gas, in cylinders and bulk tanks.

AS/NZS 5601.1:2022 is amended as follows.

Sets out procedures for determining wind speeds and resulting wind actions to be used in the structural design of structures subjected to wind actions other than those caused by tornadoes. To be read in conjunction with AS/NZS 1170.0.

Specifies requirements and means of conformance for the design, installation and commissioning of LP Gas installations in caravans and boats for non-propulsive purposes.

Sets out requirements and means of conformance for the design, installation and commissioning of gas installations that are associated with the use or intended use of fuel gases such as natural gas, LP Gas, or biogas.