Search all content

Specifies materials, design, construction, installation, testing and maintenance requirements for below ground plastics gas distribution networks to be used in conjunction with AS/NZS 4645.1, for the distribution of fuel gas suitable for domestic, commercial or industrial uses.

Sets out a method for evaluating the annual energy performance of water heaters using a combination of test results for component performance and mathematical models to determine the standardized annual supplementary energy use.

Describes a single test method for grading building materials on the basis of ignition tendency, flame spread, heat development and tendency to produce smoke.

This Amendment applies to the following elements:• Global changes• Clauses 1.1.2, 1.1.3.1, 1.1.3.4, 1.2, 1.3, 1.4, 2.2.1, 2.2.2, 2.2.3, 2.8.1, 2.8.4, 2.8.6, 2.9.1, 2.9.2, 2.9.3, 2.9.4, 2.9.5, 2.9.6, 2.13.3, 2.13.3.1, 2.13.3.2, 3.1.8, 4.2, 5.1.4.1, 5.1.4.2, 5.1.7, 5.2.7.3, 5.2.12.2, 5.2.12.3, 6, 6.1, 6.1.1, 6.1.2, 6.1.3, 6.1.4, 6.3.2, 6.3.3, 6.3.4, 6.3.5, 6.3.6, 6.5, 6.6, 6.7, 6.11.1, 7.1, 7.2, 7.3.1, 7.3.2, 7.4.1, 7.4.3, 8.1, 8.4.1, 9.2, 9.3.2.2, 9.4, 9.7, 9.8, 9.9.1, 9.10.1, 10.3.1, C.4, C.5.2, C.5.4, C.6.4, E.1.1, E.1.2, E.2.1, E.3.2.1, E.3.3.1, H.1, H.2, H.3, L.3.3.4• Figures 3.1.8(E), 7.3.1• Table 5.1.4.3• Bibliography

​Sets out requirements and recommendations for the safe storage and handling of LP Gas, in cylinders and bulk tanks.

Outlines a performance-based approach to the maintenance of ducts and components forming air-handling systems with respect to the control of microorganisms, within such systems.

Applicable to the design, construction, and installation of refrigerating systems, including piping, components, materials, and ancillary equipment directly associated with such systems.

AS NZS 3000 2018 (known as the Australian/New Zealand Wiring Rules) specifies requirements for the design, construction and verification of electrical installations, including the selection and installation of electrical equipment forming part of such electrical installations; part 1 provides provisions that constitute the minimum regulatory requirements for a safe electrical installation; part 2 provides work methods and installation practices that are ‘deemed to comply’ with the requirements of Part 1.

Specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment, and establishes procedures for the operation, maintenance, and repair of refrigerating systems and the recovery of refrigerants.

Outlines a performance-based approach to the maintenance of cooling water systems with respect to the control of microorganisms, including Legionellae, within such systems. This approach combines automatically regulated water treatment with monitoring, assessment and control strategies to help create a low risk environment within the cooling water system.