Search all content

1 - 10 of 29 results
AS 1735.11-1986 SAA Lift Code, Part 11: Fire-rated landing doors 1986 cover

Standards Australia

Version:  Third Edition 1986.  (Current)
Sets out requirements for fire-rated landing doors for retarding the passage of fire through openings in fire-rated liftwells; it applies where doors are required to have a fire-rating certificate.
AS 1684.3:2021 Amd 1:2024 Residential timber-framed construction, Part 3: Cyclonic areas 2024 cover

Standards Australia

Version:  First Edition 2024.  (Current)
This Amendment applies to the following elements: Clauses 1.2, 1.4.2, 1.5, 1.11, 1.12, 4.2.2.3, 6.2.1.3 and 8.3.6.5, Figure 6.3, Table 8.18, 9.19 and 9.20, Bibliography.
AS 1684.2:2021 Amd 1:2024 Residential timber-framed construction, Part 2: Non-cyclonic areas 2024 cover

Standards Australia

Version:  First Edition 2024.  (Current)
This Amendment applies to the following elements: Clauses 1.2, 1.4.2, 1.5, 1.11, 1.12, 4.2.2.3, 6.2.1.3, 8.3.6.5, Figure 6.3, Tables 8.18, 9.19 and 9.20, Bibliography.
AS 1735.19:2019 Lifts, escalators and moving walks, Part 19: Safety rule for the construction and installation of lifts - Lifts for the transport of persons and goods - Remote alarm on passenger and goods passenger lifts 2019 cover

Standards Australia

Version:  First Edition 2019.  (Current)
Specifies requirements for alarm systems for all types of passenger and goods passenger lifts; deals with the minimum information to be provided as part of the instruction manual related to maintenance and the rescue service.
AS 1720.5:2015 Timber structures, Part 5: Nailplated timber roof trusses 2015 cover

Standards Australia

Version:  First Edition 2015.  (Current)
Sets out requirements for the design of nailplated timber roof trusses for residential and similar building applications in accordance with AS1720.1, AS4055 and the AS(/NZS)1170 series.
AS 1735.12:2020 Lifts, escalators and moving walks, Part 12: Facilities for persons with disabilities (EN 81-70:2018, MOD) 2020 cover

Standards Australia

Version:  First Edition 2020.  (Current)
Adopts EN 81-70:2018 with modifications for Australia, which specifies the minimum requirements for the safe and independent access and use of lifts by a wide range of persons, including persons with disabilities.
AS 1735.4:2020 Lifts, escalators and moving walks, Part 4: Safety rules for the construction and installation of lifts - Electric and hydraulic service lifts 2020 cover

Standards Australia

Version:  Fourth Edition 2020.  (Current)
Identically adopts EN 81 3:2000+A1:2008, specifying safety rules for the construction and installation of permanently installed new electric service lifts with traction or positive drive, or hydraulic service lifts defined as lifting equipment, serving defined landing levels, having a car which is inaccessible, suspended by ropes or chains or supported by a ram and moving between rigid vertical guide rails or guide rails.
AS 1720.3:2016 Timber structures, Part 3: Design criteria for timber-framed residential buildings 2016 cover

Standards Australia

Version:  First Edition 2016.  (Current)
Part of the AS 1684 series, sets out the design methods, assumptions and other criteria, including uplift forces and racking pressures, suitable for the design of timber-framed buildings constructed within the limitations and parameters of, and using the building practice described in, AS 1684.2, AS 1684.3 and AS 1684.4.
Mesothelioma in Australia: cresting the third wave 2016 cover

Version:  2016.  (Current)
Proposes approaches to obtaining the information needed to properly estimate the risk of third-wave asbestos exposures, and guide actions that will crest a likely third-wave with minimum harm and cost to the community.
An Exploration Of Factors Influencing Quality Management System (Qms) Implementation: The Case Of The Australian Construction Industry 2020 cover

Version:  2020.  (Current)
This research primarily aims to investigate an inclusive list of factors impacting on quality management system deployment in the construction industry building sector by focusing exclusively on the external factors and the critical success factors of project level in order to develop a comprehensive framework of quality management system deployment.