Search all content

1 - 10 of 25 results
Plumbing and Drainage Act 2011 No 59 (NSW) 2011 cover

NSW Government

Version:  2011.  (Current)
This Act is the Plumbing and Drainage Act 2011. (NSW legislation.)
Plumbing and Drainage Regulation 2017 (NSW) 2017 cover

NSW Government

Version:  2017.  (Current)
This Regulation is the Plumbing and Drainage Regulation 2017.(NSW legislation.)
AS 3958:2023 Amd 1:2024 Installation of ceramic and stone tiles 2024 cover

Standards Australia

Version:  First Edition 2024.  (Current)
This Amendment applies to the following elements of AS 3958:2023: Figures 3.3.3.1, 3.3.3.2, 3.3.4.1, 3.3.5.1, 5.4.7.3(D) and the Bibliography.
AS 4654.1-2012 Waterproofing membranes for external above-ground use, Part 1: Materials 2012 cover

Standards Australia

Version:  Second Edition 2012.  (Pending Revision)
Sets out requirements for waterproofing membranes for external above-ground use, installed in accordance with AS 4654.2.
Plumbing Regulations 2018 (VIC) 2018 cover

Victorian Government

Version:  2018.  (Current)
Authorised Version incorporating amendments as at 1 February 2024. (VIC legislation.)
AS 4654.2-2012 Waterproofing membranes for external above-ground use, Part 2: Design and installation 2012 cover

Standards Australia

Version:  Second Edition 2012.  (Pending Revision)
Sets out a consistent and reliable approach to the design and installation of external waterproofing membrane systems.
Plumbing and Drainage Act 2018 (QLD) 2018 cover

Queensland Government

Version:  2018.  (Current)
This Act may be cited as the Plumbing and Drainage Act 2018. (QLD legislation.)
AS 3740:2021 Waterproofing of domestic wet areas 2021 cover

Standards Australia

Version:  Fifth Edition 2021.  (Current)
Sets out minimum requirements for the materials, design and installation of waterproofing for domestic wet areas in Class 1, Class 2 and Class 4 buildings as defined in the NCC. It also applies to wet areas within Class 3 to 9 buildings as if it were a Class 2 or 4 part of a building.
AS 1397:2021 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium 2021 cover

Standards Australia

Version:  Seventh Edition 2021.  (Current)
Specifies requirements for continuously hot-dip metallic coated sheet steel and strip supplied in thicknesses up to and including 5.0 mm.
AS 3958:2023 Installation of ceramic and stone tiles 2023 cover

Standards Australia

Version:  Third Edition 2023.  (Current)
AS 3958:2023 provides instructions on the preparation of the background and the bonded fixing and grouting of floor and wall tiles including mosaic tiles and panels.