Search all content

1 - 10 of 41 results
AS/NZS 3013:2005 Electrical installations - Classification of the fire and mechanical performance of wiring system elements 2005 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2005.  (Current)
Sets out a classification scheme for wiring systems according to their resistance to the hazards of fire and mechanical damage.
AS 2444-2001 Portable fire extinguishers and fire blankets - Selection and location 2001 cover

Standards Australia

Version:  Sixth Edition 2001.  (Current)
Specifies the criteria for the selection of portable fire extinguishers and the requirements for their application, location and distribution.
AS 1670.3:2024 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 3: Fire alarm monitoring 2024 cover

Standards Australia

Version:  Fourth Edition 2024.  (Current)
The objective of this Standard is to achieve the reliable monitoring of fire detection and alarm systems (FDAS) installed in buildings by a remotely located monitoring service and to transfer required signals to a fire dispatch centre.
AS 1530.4:2014 Methods for fire tests on building materials, components and structures, Part 4: Fire-resistance tests for elements of construction 2014 cover

Standards Australia

Version:  Sixth Edition 2014.  (Current)
Sets out test procedures and criteria for the determination of fire-resistance of elements of building construction.
AS/NZS 4234:2021 Heated water systems - Calculation of energy consumption 2021 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2021.  (Current)
Sets out a method for evaluating the annual energy performance of water heaters using a combination of test results for component performance and mathematical models to determine the standardized annual supplementary energy use.
AS/NZS 1530.3:1999 Methods for fire tests on building materials, components and structures, Part 3: Simultaneous determination of ignitability, flame propagation, heat release and smoke release 1999 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1999.  (Current)
Describes a single test method for grading building materials on the basis of ignition tendency, flame spread, heat development and tendency to produce smoke.
AS 2484.1-1990 Fire - Glossary of terms, Part 1: Fire tests 1990 cover

Standards Australia

Version:  First Edition 1990.  (Current)
Provides a glossary of terms to be used in connection with fire testing; also refers to deprecated terms which should not be used in connection with fire testing.
AS/NZS 3666.4:2011 Air-handling and water systems of buildings - Microbial control, Part 4: Performance-based maintenance of air-handling systems (ducts and components) 2011 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2011.  (Pending Revision)
Outlines a performance-based approach to the maintenance of ducts and components forming air-handling systems with respect to the control of microorganisms, within such systems.
AS/NZS 5149.2:2016 Refrigerating systems and heat pumps - Safety and environmental requirements, Part 2: Design, construction, testing, marking and documentation (ISO 5149-2:2014, MOD) 2016 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2016.  (Current)
Applicable to the design, construction, and installation of refrigerating systems, including piping, components, materials, and ancillary equipment directly associated with such systems.
AS/NZS 3000:2018 Electrical installations (known as the Australian/New Zealand Wiring Rules) 2018 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2018.  (Current)
AS NZS 3000 2018 (known as the Australian/New Zealand Wiring Rules) specifies requirements for the design, construction and verification of electrical installations, including the selection and installation of electrical equipment forming part of such electrical installations; part 1 provides provisions that constitute the minimum regulatory requirements for a safe electrical installation; part 2 provides work methods and installation practices that are ‘deemed to comply’ with the requirements of Part 1.