Search all content

1 - 10 of 33 results
AS 1530.2-1993 Methods for fire tests on building materials, components and structures, Part 2: Test for flammability of materials 1993 cover

Standards Australia

Version:  Second Edition 1993.  (Current)
Specifies the apparatus and test method for determining the flammability index of a material. Main changes in this edition of the Standard are the inclusion of a statistical evaluation of the test results, a change to the speed factor formula so that the flammability indices form a continuous range and a more detailed form of test report.
AS 1735.11-1986 SAA Lift Code, Part 11: Fire-rated landing doors 1986 cover

Standards Australia

Version:  Third Edition 1986.  (Current)
Sets out requirements for fire-rated landing doors for retarding the passage of fire through openings in fire-rated liftwells; it applies where doors are required to have a fire-rating certificate.
AS 1905.1:2015 Components for the protection of openings in fire-resistant walls, Part 1: Fire-resistant doorsets 2015 cover

Standards Australia

Version:  Sixth Edition 2015.  (Current)
Sets out requirements for the construction and installation of fire-resistant doorsets that are used to protect openings in walls, and for partitions that are required to resist the passage of fire.
AS/NZS 3012:2019 Electrical installations - Construction and demolition sites 2019 cover

Standards Australia/Standards New Zealand

Version:  Fifth Edition 2019.  (Current)
Specifies minimum requirements for the design, construction and testing of electrical installations that supply electricity to appliances and equipment on construction and demolition sites, and for the in-service testing of portable, transportable and fixed electrical equipment used on construction and demolition sites.
AS/NZS 3000:2018 Amd 3:2023 Electrical installations (known as the Australian/New Zealand Wiring Rules) 2023 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2023.  (Current)
AS/NZS 3000:2018 is amended as follows.
AS 5113:2016 Classification of external walls of buildings based on reaction-to-fire performance 2016 cover

Standards Australia

Version:  First Edition 2016.  (Current)
Sets out the procedures for the assessment and classification of external walls of buildings according to their tendency to spread fire via the building façade.
AS 1905.2-2005 Components for the protection of openings in fire-resistant walls, Part 2: Fire-resistant roller shutters 2005 cover

Standards Australia

Version:  Fourth Edition 2005.  (Current)
Specifies requirements for design, construction and installation of vertically operating roller shutters intended to protect trafficable openings in fire-rated walls; compliance is based on prototype testing in accordance with AS 1530.4; labelling requirements are included.
AS 5637.1:2015 Determination of fire hazard properties, Part 1: Wall and ceiling linings 2015 cover

Standards Australia

Version:  First Edition 2015.  (Current)
Sets out procedures for the assessment of internal wall and ceiling linings according to their tendency to ignite; their tendency to release heat once ignition has occurred; their tendency to cause flashover; their tendency to release smoke; and their contribution to fire growth.
AS 4072.1-2005 Components for the protection of openings in fire-resistant separating elements, Part 1: Service penetrations and control joints 2005 cover

Standards Australia

Version:  Second Edition 2005.  (Current)
Specifies requirements for the testing, interpretation of test results, and installation of penetration sealing systems and control joints sealing systems in fire-resistant elements of construction.
AS/NZS 3003:2018 Electrical installations - Patient areas 2018 cover

Standards Australia/Standards New Zealand

Version:  Sixth Edition 2018.  (Current)
Specifies safety requirements for electrical installations in areas where it is intended that low-voltage medical electrical equipment will be used on a patient; it applies to new electrical installations and to alterations, additions and repairs of existing electrical installations.