Search all content

31 - 40 of 40 results
AS/NZS 1530.3:1999 Methods for fire tests on building materials, components and structures, Part 3: Simultaneous determination of ignitability, flame propagation, heat release and smoke release 1999 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1999.  (Current)
Describes a single test method for grading building materials on the basis of ignition tendency, flame spread, heat development and tendency to produce smoke.
AS 1530.1:2024 Methods for fire tests on building materials, components and structures, Part 1: Combustibility test for materials (ISO 1182:2020, NEQ) 2024 cover

Standards Australia

Version:  Fourth Edition 2024.  (Current)
Specifies a test method for determining the combustibility of building materials and is one of a series of test methods of evaluating the potential fire hazard of building products; the test is for building materials other than coated, faced or laminated materials which, although not completely inert, produce only a limited amount of heat and flame when exposed to temperatures of approximately 750 °C.
AS ISO 13007.2-2013 Ceramic tiles - Grouts and adhesives, Part 2: Test methods for adhesives 2013 cover

Standards Australia

Version:  First Edition 2013.  (Current)
Adopts ISO 13007-2:2010, which specifies methods for determining characteristics for adhesives used in the installation of ceramic tiles.
AS ISO 13007.4-2013 Ceramic tiles - Grouts and adhesives, Part 4: Test methods for grouts 2013 cover

Standards Australia

Version:  First Edition 2013.  (Current)
Adopts ISO 13007-4:2010, which specifies methods for determining characteristics for adhesives used in the installation of ceramic tiles.
AS 1684.3-2010 Residential timber-framed construction, Part 3: Cyclonic areas 2010 cover

Standards Australia

Version:  Third Edition 2010.  (Available Superseded)
Provides the building industry with procedures that can be used to determine building practice, to design or check construction details, and to determine member sizes, and bracing and fixing requirements for timber-framed construction in cyclonic areas.
AS 3740-2010 Waterproofing of domestic wet areas 2010 cover

Standards Australia

Version:  Fourth Edition 2010.  (Available Superseded)
Sets out minimum requirements for the materials, design and installation of waterproofing for domestic wet areas.
AS 1684.2-2010 Residential timber-framed construction, Part 2: Non-cyclonic areas 2010 cover

Standards Australia

Version:  Third Edition 2010.  (Available Superseded)
AS 1684.2 2010 specifies requirements for the building industry with procedures that can be used to determine building practice, to design or check construction details, and to determine member sizes, and bracing and fixing requirements for timber-framed construction in non-cyclonic areas.
AS 1428.1-2009 Design for access and mobility, Part 1: General requirements for access - New building work 2009 cover

Standards Australia

Version:  Fifth Edition 2009.  (Available Superseded)
AS 1428.1 2009 Sets out minimum design requirements for new building work, as required by the Building Code of Australia (BCA), to enable access for people with disabilities.
AS 1684.4-2010 Residential timber-framed construction, Part 4: Simplified - Non-Cyclonic Areas 2010 cover

Standards Australia

Version:  Fourth Edition 2010.  (Available Superseded)
Specifies requirements for the building industry with procedures that can be used to determine building practice, to design or check construction details, and to determine member sizes, and bracing and fixing requirements for timber-framed construction in non-cyclonic wind classifications N1 and N2. Also referred to as the timber framing code.
AS 1530.1-1994 Methods for fire tests on building materials, components and structures, Part 1: Combustibility test for materials 1994 cover

Standards Australia

Version:  Third Edition 1994.  (Available Superseded)
Sets out a test method for determining the combustibility of building materials and is one of a series of test methods for evaluating the potential fire hazard of building products.