Search all content

1 - 10 of 18 results
AS 1735.11-1986 SAA Lift Code, Part 11: Fire-rated landing doors 1986 cover

Standards Australia

Version:  Third Edition 1986.  (Current)
Sets out requirements for fire-rated landing doors for retarding the passage of fire through openings in fire-rated liftwells; it applies where doors are required to have a fire-rating certificate.
AS 1905.1:2015 Components for the protection of openings in fire-resistant walls, Part 1: Fire-resistant doorsets 2015 cover

Standards Australia

Version:  Sixth Edition 2015.  (Current)
Sets out requirements for the construction and installation of fire-resistant doorsets that are used to protect openings in walls, and for partitions that are required to resist the passage of fire.
AS 5113:2016 Classification of external walls of buildings based on reaction-to-fire performance 2016 cover

Standards Australia

Version:  First Edition 2016.  (Current)
Sets out the procedures for the assessment and classification of external walls of buildings according to their tendency to spread fire via the building façade.
AS 1905.2-2005 Components for the protection of openings in fire-resistant walls, Part 2: Fire-resistant roller shutters 2005 cover

Standards Australia

Version:  Fourth Edition 2005.  (Current)
Specifies requirements for design, construction and installation of vertically operating roller shutters intended to protect trafficable openings in fire-rated walls; compliance is based on prototype testing in accordance with AS 1530.4; labelling requirements are included.
AS 5637.1:2015 Determination of fire hazard properties, Part 1: Wall and ceiling linings 2015 cover

Standards Australia

Version:  First Edition 2015.  (Current)
Sets out procedures for the assessment of internal wall and ceiling linings according to their tendency to ignite; their tendency to release heat once ignition has occurred; their tendency to cause flashover; their tendency to release smoke; and their contribution to fire growth.
AS 4072.1-2005 Components for the protection of openings in fire-resistant separating elements, Part 1: Service penetrations and control joints 2005 cover

Standards Australia

Version:  Second Edition 2005.  (Current)
Specifies requirements for the testing, interpretation of test results, and installation of penetration sealing systems and control joints sealing systems in fire-resistant elements of construction.
AS 2665-2001 Smoke/heat venting systems - Design, installation and commissioning 2001 cover

Standards Australia

Version:  Second Edition 2001.  (Current)
Specifies requirements for the design, installation and commissioning of a system of sutomatic smoke/heat release vents in conjunction with associated smoke reservoirs in buildings.
Queensland Home Warranty Scheme: Product Disclosure 2021 cover

Queensland Building And Construction Commission

Version:  2021.  (Current)
A summary of applicable cover, for contracts signed on or after 28 October 2016.
Queensland Home Warranty Scheme: Premium Table For Construction Of A New Residence 2023 cover

Queensland Building And Construction Commission

Version:  2023.  (Current)
Effective 1 July 2020.
What is the Queensland Home Warranty Scheme (QHWS) 2024 cover

Queensland Building And Construction Commission

Version:  2024.  (Current)
The Queensland Home Warranty Scheme is a not-for-profit statutory insurance scheme funded through premium payments and administered by the QBCC to cover homeowners for loss suffered if their contractor fails to complete contracted works or rectify defects.