Search all content

Specifies requirements for the design, installation and commissioning of a system of sutomatic smoke/heat release vents in conjunction with associated smoke reservoirs in buildings.

AS/NZS 5601.1:2022 is amended as follows.

Specifies requirements and safety principles for the design, installation and operation of industrial appliances that involve the combustion of gas or liquid fuel and the controlled generation of combustible vapours or combustible dusts.

This Amendment applies to the following elements:• Global changes• Clauses 1.1.2, 1.1.3.1, 1.1.3.4, 1.2, 1.3, 1.4, 2.2.1, 2.2.2, 2.2.3, 2.8.1, 2.8.4, 2.8.6, 2.9.1, 2.9.2, 2.9.3, 2.9.4, 2.9.5, 2.9.6, 2.13.3, 2.13.3.1, 2.13.3.2, 3.1.8, 4.2, 5.1.4.1, 5.1.4.2, 5.1.7, 5.2.7.3, 5.2.12.2, 5.2.12.3, 6, 6.1, 6.1.1, 6.1.2, 6.1.3, 6.1.4, 6.3.2, 6.3.3, 6.3.4, 6.3.5, 6.3.6, 6.5, 6.6, 6.7, 6.11.1, 7.1, 7.2, 7.3.1, 7.3.2, 7.4.1, 7.4.3, 8.1, 8.4.1, 9.2, 9.3.2.2, 9.4, 9.7, 9.8, 9.9.1, 9.10.1, 10.3.1, C.4, C.5.2, C.5.4, C.6.4, E.1.1, E.1.2, E.2.1, E.3.2.1, E.3.3.1, H.1, H.2, H.3, L.3.3.4• Figures 3.1.8(E), 7.3.1• Table 5.1.4.3• Bibliography

​Sets out requirements and recommendations for the safe storage and handling of LP Gas, in cylinders and bulk tanks.

Specifies the uniform minimum requirements for the design, construction and safe operation of Type B appliances that are intended for use with town gas, natural gas, simulated natural gas, liquefied petroleum gas and tempered liquefied petroleum gas or any combination of these gases either together or with other fuels.

Sets out requirements and means of conformance for the design, installation and commissioning of gas installations that are associated with the use or intended use of fuel gases such as natural gas, LP Gas, or biogas.

AS/NZS IEC 60079.10.1:2022 adopts IEC 60079 10 1:2020, which specify requirements for the classification of areas where flammable gas or vapour hazards may arise and may then be used as a basis to support the proper design, construction, operation and maintenance of equipment for use in hazardous areas.

Specifies the apparatus and test method for determining the flammability index of a material. Main changes in this edition of the Standard are the inclusion of a statistical evaluation of the test results, a change to the speed factor formula so that the flammability indices form a continuous range and a more detailed form of test report.

Sets out test procedures and criteria for the determination of fire-resistance of elements of building construction.