Search all content

1 - 10 of 20 results
SA HB 84:2018 Guide to concrete repair and protection 2018 cover

Standards Australia

Version:  First Edition 2018.  (Current)
AS 3610-1995 Formwork for concrete 1995 cover

Standards Australia

Version:  Second Edition 1995.  (Current)
Specifies requirements for the design, fabrication, erection and stripping of formwork as well as the evaluation and repair of the formed concrete surface; colour evaluation charts are included in an Appendix.
AS/NZS ISO 22846.1:2020 Personal equipment for protection against falls - Rope access systems, Part 1: Fundamental principles for a system of work 2020 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2020.  (Current)
This Standard adopts ISO 22846-1:2003, which gives the fundamental principles for the use of rope-access methods for work at height; intended for use by employers, employees and self-employed persons who use rope-access methods, by those commissioning rope-access work and by rope-access associations.
AS 3600:2018 Amd 2:2021 Concrete structures 2021 cover

Standards Australia

Version:  Fifth Edition 2021.  (Current)
The 2018 edition of AS 3600 is amended as follows; the amendments should be inserted in the appropriate places.
AS 2870-2011 Residential slabs and footings 2011 cover

Standards Australia

Version:  Fourth Edition 2011.  (Pending Revision)
Sets out requirements for the classification of a site and the design and construction of a footing system for a single dwelling house, town house or the like which may be detached or separated by a party wall or common wall but not situated vertically above or below another dwelling.
AS 1892.5:2020 Portable ladders, Part 5: Selection, safe use and care 2020 cover

Standards Australia

Version:  First Edition 2020.  (Current)
Sets out the minimum requirements and recommended safe practices for the selection, use and maintenance of portable ladders.
AS/NZS 1891.4:2009 Industrial fall-arrest systems and devices, Part 4: Selection, use and maintenance 2009 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2009.  (Pending Revision)
Specifies requirements and sets out recommendations for the selection, safe use and maintenance of industrial fall-arrest systems and devices based on the use of safety harnesses, horizontal life lines and rails, fall-arrest devices, and associated lanyards, connectors, anchorages and fittings.
AS/NZS 5149.2:2016 Refrigerating systems and heat pumps - Safety and environmental requirements, Part 2: Design, construction, testing, marking and documentation (ISO 5149-2:2014, MOD) 2016 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2016.  (Current)
Applicable to the design, construction, and installation of refrigerating systems, including piping, components, materials, and ancillary equipment directly associated with such systems.
AS/NZS 5149.1:2016 Refrigerating systems and heat pumps - Safety and environmental requirements, Part 1: Definitions, classification and selection criteria (ISO 5149-1:2014, MOD) 1994 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2016.  (Current)
Specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment, and establishes procedures for the operation, maintenance, and repair of refrigerating systems and the recovery of refrigerants.
AS/NZS ISO 817:2016 Refrigerants - Designation and safety classification 2016 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2016.  (Current)
This Standard provides an unambiguous system for assigning designations to refrigerants. It also establishes a system for assigning a safety classification to refrigerants based on toxicity and flammability data, and provides a means of determining the refrigerant concentration limit.