Search all content

1 - 10 of 21 results
SA HB 84:2018 Guide to concrete repair and protection 2018 cover

Standards Australia

Version:  First Edition 2018.  (Current)
AS 3610-1995 Formwork for concrete 1995 cover

Standards Australia

Version:  Second Edition 1995.  (Current)
Specifies requirements for the design, fabrication, erection and stripping of formwork as well as the evaluation and repair of the formed concrete surface; colour evaluation charts are included in an Appendix.
AS 3600:2018 Amd 2:2021 Concrete structures 2021 cover

Standards Australia

Version:  Fifth Edition 2021.  (Current)
The 2018 edition of AS 3600 is amended as follows; the amendments should be inserted in the appropriate places.
AS 4576:2020 Guidelines for scaffolding 2020 cover

Standards Australia

Version:  First Edition 2020.  (Current)
Gives practical guidance for training, the preparation of sites for scaffolding, and the safe selection, supply, erection, alteration, dismantling, maintenance, inspection and use of scaffolding and scaffolding equipment (companion to the AS(/NZS) 1576 series.
AS 2870-2011 Residential slabs and footings 2011 cover

Standards Australia

Version:  Fourth Edition 2011.  (Pending Revision)
Sets out requirements for the classification of a site and the design and construction of a footing system for a single dwelling house, town house or the like which may be detached or separated by a party wall or common wall but not situated vertically above or below another dwelling.
AS 1576.5:2021 Scaffolding, Part 5: Prefabricated trestle and trestle ladder scaffolds 2021 cover

Standards Australia

Version:  First Edition 2021.  (Current)
AS 1576.5 specifies requirements the design and operational performance for trestle scaffolds and trestle ladder scaffolds.
AS/NZS 1576.2:2016 Scaffolding, Part 2: Couplers and accessories 2016 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2016.  (Current)
Specifies requirements for couplers and accessories for scaffolding complying with AS/NZS1576.3 and AS/NZS1576.6.
AS 1576.7 (Int):2021 Scaffolding, Part 7: Safe use of encapsulation on scaffolding 2021 cover

Standards Australia

Version:  First Edition 2021.  (Current)
Specifies requirements and test methods for encapsulation and containment products for attachment to scaffolding, including fire hazard properties, strength properties, fixing requirements and installation procedures for various types of encapsulation.
AS 1657:2018 Fixed platforms, walkways, stairways and ladders - Design, construction and installation 2018 cover

Standards Australia

Version:  Fifth Edition 2018.  (Current)
Sets out requirements for the design, selection, construction and installation of fixed platforms, walkways, stairways and ladders that are intended to provide safe access to places used by operating, inspection, maintenance and servicing personnel.
AS 1576.6:2020 Scaffolding, Part 6: Metal tube-and-coupler scaffolding - Deemed to conform to AS/NZS 1576.1 2020 cover

Standards Australia

Version:  First Edition 2020.  (Current)
The objective of this Standard is to provide tabulated geometrical limits and guidance which, when applied to tube and coupler installations, would ensure conformance to requirements of AS/NZS 1576.1.