Search all content

1 - 10 of 34 results
AS 1735.11-1986 SAA Lift Code, Part 11: Fire-rated landing doors 1986 cover

Standards Australia

Version:  Third Edition 1986.  (Current)
Sets out requirements for fire-rated landing doors for retarding the passage of fire through openings in fire-rated liftwells; it applies where doors are required to have a fire-rating certificate.
AS 4254.1:2021 Ductwork for air-handling systems in buildings, Part 1: Flexible duct 2021 cover

Standards Australia

Version:  Second Edition 2021.  (Current)
Provides standardized requirements for the performance testing, manufacture and installation of flexible ducts.
AS/NZS 1720.4:2019 Timber structures, Part 4: Fire resistance of timber elements 2019 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2019.  (Current)
The objective of this Standard is to provide a method for determining the fire resistance for structural adequacy and insulation of sawn timber, timber in pole form, plywood, laminated veneer lumber (LVL), and glued-laminated structural timber elements as an alternative to the test method specified in AS 1530.4.
AS/NZS 1546.1:2008 On-site domestic wastewater treatment units, Part 1: Septic tanks 2008 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2008.  (Current)
AS/NZS 1546.1 specifies performance requirements and performance criteria for septic tanks, technical means of compliance and provides test specifications that enable septic tanks to be manufactured to comply with the performance requirements and performance criteria.
AS 1546.4:2016 On-site domestic wastewater treatment units, Part 4: Domestic greywater treatment systems 2016 cover

Standards Australia

Version:  First Edition 2016.  (Current)
Specifies requirements for the performance, design, installation and testing of domestic greywater treatment systems (DGTS) and associated fittings for single domestic dwellings where adequate backflow protection is provided in accordance with AS/NZS3500.1.
AS 3600:2018 Amd 1:2018 Concrete Structures 2018 cover

Standards Australia

Version:  Fifth Edition 2018.  (Current)
The 2018 edition of AS 3600 is amended as follows; the amendments should be inserted in the appropriate places.
AS 2118.5-2008 Automatic fire sprinkler systems, Part 5: Home fire sprinkler systems 2008 cover

Standards Australia

Version:  Second Edition 2008.  (Current)
Specifies requirements for the design, installation, commissioning and maintenance of automatic fire sprinkler systems for one and two family homes.
AS/NZS 4858:2004 Wet area membranes 2004 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2004.  (Current)
Sets out to classify membranes based on elastic properties, which can then be used to give guidance on the type of detailing for a specific membrane referred to in AS 3740.
AS/NZS 1680.1:2006 Interior and workplace lighting, Part 1: General principles and recommendations 2006 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2006.  (Pending Revision)
Provides general principles and recommendations for the lighting of building interiors to enhance the performance and comfort of those performing visual tasks; deals with illuminating essential task details, using both artificial light and daylight, while controlling or excluding factors that might cause visual discomfort.
AS 5011-2001 Hygienic production of natural casings for human consumption 2001 cover

Standards Australia

Version:  First Edition 2001.  (Current)
Sets out requirements for the hygienic production of natural casings for human consumption. This Standard was developed by a technical subcommittee of the Standing Committee on Agriculture and Resource Management (SCARM) under the Agriculture and Resource Management Council of Australia and New Zealand (ARMCANZ).