Search all content

1 - 10 of 41 results
AS/NZS 5139:2019 Electrical installations - Safety of battery systems for use with power conversion equipment 2019 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2019.  (Current)
Specifies requirements for general installation and safety requirements for battery energy storage systems (BESSs), where the battery system is installed in a location, such as a dedicated enclosure or room, and is connected with power conversion equipment (PCE) to supply electric power to other parts of an electrical installation.
AS/NZS 5033:2021 Installation and safety requirements for photovoltaic (PV) arrays 2021 cover

Standards Australia/Standards New Zealand

Version:  Fourth Edition 2021.  (Current)
Sets out general installation and safety requirements for electrical installations of PV arrays, including d.c. array wiring, electrical protection devices, switching and earthing provisions.
AS 1530.4:2014 Methods for fire tests on building materials, components and structures, Part 4: Fire-resistance tests for elements of construction 2014 cover

Standards Australia

Version:  Sixth Edition 2014.  (Current)
Sets out test procedures and criteria for the determination of fire-resistance of elements of building construction.
AS/NZS 4234:2021 Heated water systems - Calculation of energy consumption 2021 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2021.  (Current)
Sets out a method for evaluating the annual energy performance of water heaters using a combination of test results for component performance and mathematical models to determine the standardized annual supplementary energy use.
AS/NZS 1530.3:1999 Methods for fire tests on building materials, components and structures, Part 3: Simultaneous determination of ignitability, flame propagation, heat release and smoke release 1999 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1999.  (Current)
Describes a single test method for grading building materials on the basis of ignition tendency, flame spread, heat development and tendency to produce smoke.
AS/NZS 3008.1.1:2017 Electrical installations - Selection of cables, Part 1.1: Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions 2017 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2017.  (Pending Revision)
Sets out a method for cable selection for those types of electrical cables and methods of installation that are in common use at working voltages up to and including 0.6/1 kV at 50 Hz a.c.
AS 2484.1-1990 Fire - Glossary of terms, Part 1: Fire tests 1990 cover

Standards Australia

Version:  First Edition 1990.  (Current)
Provides a glossary of terms to be used in connection with fire testing; also refers to deprecated terms which should not be used in connection with fire testing.
AS/NZS 3666.4:2011 Air-handling and water systems of buildings - Microbial control, Part 4: Performance-based maintenance of air-handling systems (ducts and components) 2011 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2011.  (Pending Revision)
Outlines a performance-based approach to the maintenance of ducts and components forming air-handling systems with respect to the control of microorganisms, within such systems.
AS/NZS 4509.2:2010 Stand-alone power systems, Part 2: System design 2010 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2010.  (Pending Revision)
Provides requirements and guidance for the design of stand-alone power systems with energy storage at extra-low voltage and used for the supply of extra-low and/or low voltage electric power in a domestic situation.
AS/NZS 4509.1:2009 Stand-alone power systems, Part 1: Safety and installation 2009 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2009.  (Pending Revision)
Sets out safety and installation requirements for stand-alone power systems used for the supply of extra-low (ELV) and/or low voltage (LV) electric power to a single load, or an electrical installation in a single residence or building, or a group of residences or buildings and associated items with switchboards to AS/NZS 3000 requirements.