Search all content

11 - 20 of 36 results
Exemptions from the engineered stone ban 2024 cover

Safe Work Australia

Version:  2024.  (Current)
A work health and safety (WHS) regulator can exempt a type of engineered stone from the ban.
Exemption from the engineered stone ban 2024 cover

Safe Work Australia

Version:  2024.  (Current)
Flowchart explains the exemption from engineered stone ban process.
Preparing a crystalline silica hazard control statement for high risk crystalline silica work 2022 cover

WorkSafe Victoria

Version:  2022.  (Current)
How and when to prepare and use a crystalline silica hazard control statement (hazard control statement) for high risk crystalline silica work (HRCSW).
Reduction in workplace exposure standard for respirable crystalline silica: For businesses and workers to minimise risks when working with silica 2020 cover

Workplace Health and Safety Queensland

Version:  2020.  (Current)
The national workplace exposure standard for respirable crystalline silica has been halved from an eight hour time-weighted average airborne concentration of 0.1 milligrams per cubic metre (mg/m3) to 0.05 mg/m3; this new workplace exposure standard takes effect in Queensland from 1 July 2020.
Managing respirable crystalline silica dust exposure in the stone benchtop industry: Code of practice 2019 2019 cover

Workplace Health and Safety Queensland

Version:  2019.  (Current)
Silicosis is preventable by using proper controls to eliminate or minimise expo sure to respirable crystalline silica dust in the workplace.
Guide for tunnelling work 2013 cover

Safe Work Australia

Version:  2013.  (Current)
Provides practical guidance for a person conducting a business or undertaking and workers on managing health and safety risks associated with tunnelling work.
Managing exposure to crystallinesilica: Engineered stone 2nd edition, 2022. cover

WorkSafe Victoria

Version:  2nd edition, 2022.  (Current)
Provides practical guidance for those who have duties or obligations under the Occupational Health and Safety Act 2004 (OHS Act) and the Occupational Health and Safety Regulations 2017 (OHS Regulations), in relation to exposure to crystalline silica dust as a result of working with engineered stone.
AS/NZS 5139:2019 Electrical installations - Safety of battery systems for use with power conversion equipment 2019 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2019.  (Current)
Specifies requirements for general installation and safety requirements for battery energy storage systems (BESSs), where the battery system is installed in a location, such as a dedicated enclosure or room, and is connected with power conversion equipment (PCE) to supply electric power to other parts of an electrical installation.
AS/NZS 5033:2021 Installation and safety requirements for photovoltaic (PV) arrays 2021 cover

Standards Australia/Standards New Zealand

Version:  Fourth Edition 2021.  (Current)
Sets out general installation and safety requirements for electrical installations of PV arrays, including d.c. array wiring, electrical protection devices, switching and earthing provisions.
AS/NZS 3008.1.1:2017 Electrical installations - Selection of cables, Part 1.1: Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions 2017 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2017.  (Pending Revision)
Sets out a method for cable selection for those types of electrical cables and methods of installation that are in common use at working voltages up to and including 0.6/1 kV at 50 Hz a.c.