Search all content

The 2015 edition of AS 5146.1 is amended as follows; the amendments should be inserted in the appropriate places.

This Amendment applies to the following elements:• Global changes• Clauses 1.1.2, 1.1.3.1, 1.1.3.4, 1.2, 1.3, 1.4, 2.2.1, 2.2.2, 2.2.3, 2.8.1, 2.8.4, 2.8.6, 2.9.1, 2.9.2, 2.9.3, 2.9.4, 2.9.5, 2.9.6, 2.13.3, 2.13.3.1, 2.13.3.2, 3.1.8, 4.2, 5.1.4.1, 5.1.4.2, 5.1.7, 5.2.7.3, 5.2.12.2, 5.2.12.3, 6, 6.1, 6.1.1, 6.1.2, 6.1.3, 6.1.4, 6.3.2, 6.3.3, 6.3.4, 6.3.5, 6.3.6, 6.5, 6.6, 6.7, 6.11.1, 7.1, 7.2, 7.3.1, 7.3.2, 7.4.1, 7.4.3, 8.1, 8.4.1, 9.2, 9.3.2.2, 9.4, 9.7, 9.8, 9.9.1, 9.10.1, 10.3.1, C.4, C.5.2, C.5.4, C.6.4, E.1.1, E.1.2, E.2.1, E.3.2.1, E.3.3.1, H.1, H.2, H.3, L.3.3.4• Figures 3.1.8(E), 7.3.1• Table 5.1.4.3• Bibliography

Provides requirements and test methods for materials that are used for thermal insulation within buildings, including thermal insulation of ductwork and pipework, by moderating the flow of heat through these elements.

​Sets out requirements and recommendations for the safe storage and handling of LP Gas, in cylinders and bulk tanks.

AS NZS 3000 2018 (known as the Australian/New Zealand Wiring Rules) specifies requirements for the design, construction and verification of electrical installations, including the selection and installation of electrical equipment forming part of such electrical installations; part 1 provides provisions that constitute the minimum regulatory requirements for a safe electrical installation; part 2 provides work methods and installation practices that are ‘deemed to comply’ with the requirements of Part 1.

AS/NZS 5601.1:2022 is amended as follows.

The 2017 edition of AS 2118.1 is amended as follows; the amendment(s) should be inserted in the appropriate place(s).

Sets out requirements for the design, selection, construction and installation of fixed platforms, walkways, stairways and ladders that are intended to provide safe access to places used by operating, inspection, maintenance and servicing personnel.

Specifies site wind speed classes for determining design wind speeds and wind loads for NCC Class 1 and 10 buildings within the geometric limits given in Clause 1.2; the classes are for use in the design of housing and for design, manufacturing and specifying of building products and systems used for housing.