Search all content

Part 11 deals with requirements for the design and installation of landing doors to protect openings in fire-rated liftwells against the passage of fire, where the doors are required to have a fire-rated certificate.

This standard sets out a method of test to determine whether in the presence of moisture the fibres of thermal insulation when in contact with metals normally used in dwellings will cause corrosion.

The 2002 edition of AS 4254 is amended as follows; the amendments should be inserted in the appropriate places.

Covers design of encased beams and composite beams with slabs incorporating profiled steel sheeting; flexural design by either the load factor method or the working strength method; serviceability; shear connection design; longitudinal shear transfer; construction; and testing of shear connectors.

This standard sets out a method for determining the steady-state thermal transmission properties of thermal insulation materials within the limits set by Clause 5, by means of a heat flow meter.

Describes a minimum standard of installation for particleboard flooring used in domestic housing; procedures may also apply to particleboard used as flooring in similar applications where the particleboard is applied over a system of parallel joists; specifies subfloor clearance and ventilation, floor joist spacing and sheet fixing for fitted and platform flooring systems.

Sets out test procedures and criteria for the determination of fire-resistance of elements of building construction. Follows the basic principles and provisions contained in ISO 834.

Sets out minimum requirements for the analysis, design and construction of concrete structures and members that contain reinforcing steel up to 500 MPa, prestressing tendons or both, and includes requirements for plain concrete structures and members; design requirements are given for the limit states of stability, strength, serviceability, durability and for resistance requirements to fire and earthquakes; rules are also given for prototype or proof testing of finished members and structures.

The 2011 edition of AS 3700 is amended as follows; the amendments should be inserted in the appropriate places.

Sets out minimum requirements for the analysis, design and construction of concrete structures and members which contain reinforcing steel, or prestressing tendons or both, and requirements for plain concrete structures and members; the Standard applies to concrete with a characteristic compressive strength in the range of 20 MPa to 50 MPa and a density in the range 1800 kg/m(sup)3(/sup) to 2800 kgm(sup)3(/sup).