Search all content

1 - 10 of 506 results
AS 1735.11-1986 SAA Lift Code, Part 11: Fire-rated landing doors 1986 cover

Standards Australia

Version:  Third Edition 1986.  (Current)
Sets out requirements for fire-rated landing doors for retarding the passage of fire through openings in fire-rated liftwells; it applies where doors are required to have a fire-rating certificate.
AS 4055:2021 Amd 1:2024 Wind loads for housing 2024 cover

Standards Australia

Version:  First Edition 2024.  (Current)
AS 4055:2021 is amended as follows. The amendments should be inserted in the locations as instructed.
AS 4254.1:2021 Ductwork for air-handling systems in buildings, Part 1: Flexible duct 2021 cover

Standards Australia

Version:  Second Edition 2021.  (Current)
Provides standardized requirements for the performance testing, manufacture and installation of flexible ducts.
AS/NZS 1260:2017 PVC-U pipes and fittings for drain, waste and vent applications 2017 cover

Standards Australia/Standards New Zealand

Version:  Fifth Edition 2017.  (Current)
Specifies requirements for PVC-U pipes and fittings for sewer, drain, waste and vent applications above ground or below ground and is intended to be used where the pipeline is operating under gravity flow and the operating pressure is low; includes requirements for both plain and structured wall pipes and fittings.
AS/NZS 1720.4:2019 Timber structures, Part 4: Fire resistance of timber elements 2019 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2019.  (Current)
The objective of this Standard is to provide a method for determining the fire resistance for structural adequacy and insulation of sawn timber, timber in pole form, plywood, laminated veneer lumber (LVL), and glued-laminated structural timber elements as an alternative to the test method specified in AS 1530.4.
AS/NZS 1546.1:2008 On-site domestic wastewater treatment units, Part 1: Septic tanks 2008 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2008.  (Current)
AS/NZS 1546.1 specifies performance requirements and performance criteria for septic tanks, technical means of compliance and provides test specifications that enable septic tanks to be manufactured to comply with the performance requirements and performance criteria.
AS 1546.4:2016 On-site domestic wastewater treatment units, Part 4: Domestic greywater treatment systems 2016 cover

Standards Australia

Version:  First Edition 2016.  (Current)
Specifies requirements for the performance, design, installation and testing of domestic greywater treatment systems (DGTS) and associated fittings for single domestic dwellings where adequate backflow protection is provided in accordance with AS/NZS3500.1.
AS/NZS 2269.0:2012 Amd 1:2015 Plywood - Structural, Part 0: Specifications 2015 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2015.  (Current)
AS 1860.2-2006 AMDT 1 Particleboard flooring, Part 2: Installation 2006 cover

Standards Australia

Version:  First Edition 2006.  (Current)
The 2006 edition of AS 1860.2 is amended as follows.