Search all content

451 - 460 of 494 results
AS/NZS 1170.2:2011 Amd 4:2016 Structural design actions, Part 2: Wind actions 2016 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2016.  (Superseded)
Amends AS/NZS 1170.2:2011.
AS 1288-2006 Amdt 3:2016 Glass in buildings - Selection and installation 2016 cover

Standards Australia

Version:  Fourth Edition 2016.  (Superseded)
The 2006 edition of AS 1288 is amended as follows.
AS/NZS 3500.4:2018 Amd 1:2018 Plumbing and drainage, Part 4: Heated water services 2018 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2018.  (Available Superseded)
AS/NZS 3500.2:2015 Amd 2 Plumbing and drainage, Part 2: Sanitary plumbing and drainage 2017 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2017.  (Superseded)
AS/NZS 3500.4:2015 Amd 1:2017 Plumbing and drainage, Part 4: Heated water services 2017 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2017.  (Superseded)
The 2015 edition of AS/NZS 3500.4 is amended as follows; the amendment(s) should be inserted in the appropriate place(s).
AS/NZS 3500.1:2015 Amd 1:2017 Plumbing and drainage, Part 1: Water services 2017 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2017.  (Superseded)
The 2015 edition of AS/NZS 3500.1 is amended as follows; the amendments should be inserted in the appropriate places.
AS 1668.2-2012 The use of ventilation and airconditioning in buildings, Part 2: Mechanical ventilation in buildings 2012 cover

Standards Australia

Version:  Fifth Edition 2012.  (Available Superseded)
AS 1668.2 2012 sets out requirements for mechanical air-handling systems that ventilate buildings and car parks, and for ventilation based on the need to control odours, particulates and specific gases. Also known as AS 1668 part 2.
AS 1684.2-2006 Residential timber-framed construction, Part 2: Non-cyclonic areas 2006 cover

Standards Australia

Version:  Second Edition 2006.  (Superseded)
Specifies requirements for building practice and for the selection, placement and fixing of the various structural elements used in the construction of timber-framed Class 1 and Class 10 buildings, as defined in the Building Code of Australia, for non-cyclonic areas.