Search all content

1 - 10 of 26 results
AS 4254.1:2021 Ductwork for air-handling systems in buildings, Part 1: Flexible duct 2021 cover

Standards Australia

Version:  Second Edition 2021.  (Current)
Provides standardized requirements for the performance testing, manufacture and installation of flexible ducts.
AS 3958:2023 Amd 1:2024 Installation of ceramic and stone tiles 2024 cover

Standards Australia

Version:  First Edition 2024.  (Current)
This Amendment applies to the following elements of AS 3958:2023: Figures 3.3.3.1, 3.3.3.2, 3.3.4.1, 3.3.5.1, 5.4.7.3(D) and the Bibliography.
AS 4654.1-2012 Waterproofing membranes for external above-ground use, Part 1: Materials 2012 cover

Standards Australia

Version:  Second Edition 2012.  (Pending Revision)
Sets out requirements for waterproofing membranes for external above-ground use, installed in accordance with AS 4654.2.
AS 4254.2-2012 Ductwork for air-handling systems in buildings, Part 2: Rigid duct 2012 cover

Standards Australia

Version:  First Edition 2012.  (Pending Revision)
Sets out requirements for materials, construction, and installation, including some aspects of performance, for ductwork for air-handling systems in buildings and facilities, including systems designed in accordance with requirements of AS/NZS 1668.1 and AS 1668.2.
AS/NZS 5139:2019 Electrical installations - Safety of battery systems for use with power conversion equipment 2019 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2019.  (Current)
Specifies requirements for general installation and safety requirements for battery energy storage systems (BESSs), where the battery system is installed in a location, such as a dedicated enclosure or room, and is connected with power conversion equipment (PCE) to supply electric power to other parts of an electrical installation.
AS/NZS 5033:2021 Installation and safety requirements for photovoltaic (PV) arrays 2021 cover

Standards Australia/Standards New Zealand

Version:  Fourth Edition 2021.  (Current)
Sets out general installation and safety requirements for electrical installations of PV arrays, including d.c. array wiring, electrical protection devices, switching and earthing provisions.
AS 4654.2-2012 Waterproofing membranes for external above-ground use, Part 2: Design and installation 2012 cover

Standards Australia

Version:  Second Edition 2012.  (Pending Revision)
Sets out a consistent and reliable approach to the design and installation of external waterproofing membrane systems.
AS 1668.4:2024 The use of ventilation and airconditioning in buildings, Part 4: Natural ventilation of buildings 2024 cover

Standards Australia

Version:  Second Edition 2024.  (Current)
Sets out the requirements for the design of natural ventilation systems.
AS/NZS 3008.1.1:2017 Electrical installations - Selection of cables, Part 1.1: Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions 2017 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2017.  (Pending Revision)
Sets out a method for cable selection for those types of electrical cables and methods of installation that are in common use at working voltages up to and including 0.6/1 kV at 50 Hz a.c.
AS/NZS 4509.2:2010 Stand-alone power systems, Part 2: System design 2010 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2010.  (Pending Revision)
Provides requirements and guidance for the design of stand-alone power systems with energy storage at extra-low voltage and used for the supply of extra-low and/or low voltage electric power in a domestic situation.