Search all content

1 - 10 of 25 results
AS 4055:2021 Amd 1:2024 Wind loads for housing 2024 cover

Standards Australia

Version:  First Edition 2024.  (Current)
AS 4055:2021 is amended as follows. The amendments should be inserted in the locations as instructed.
AS 3958:2023 Amd 1:2024 Installation of ceramic and stone tiles 2024 cover

Standards Australia

Version:  First Edition 2024.  (Current)
This Amendment applies to the following elements of AS 3958:2023: Figures 3.3.3.1, 3.3.3.2, 3.3.4.1, 3.3.5.1, 5.4.7.3(D) and the Bibliography.
AS 4654.1-2012 Waterproofing membranes for external above-ground use, Part 1: Materials 2012 cover

Standards Australia

Version:  Second Edition 2012.  (Pending Revision)
Sets out requirements for waterproofing membranes for external above-ground use, installed in accordance with AS 4654.2.
AS 4666:2012 Insulating glass units 2012 cover

Standards Australia

Version:  Second Edition 2012.  (Current)
Sets out requirements and guidelines for the long term type testing, glazing, periodic manufacturing testing and other associated aspects to do with insulating glass units.
AS/NZS 4667:2000 Quality requirements for cut-to-size and processed glass 2000 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2000.  (Current)
Sets out the quality requirements for cut sizes of flat, transparent, clear ordinary annealed, tinted heat-absorbing, patterned and wired glass for general glazing and/or further processing.
AS/NZS 1562.2:1999 Design and installation of sheet roof and wall cladding, Part 2: Corrugated fibre-reinforced cement 1999 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1999.  (Current)
Sets out requirements for the materials, design and installation of corrugated fibre-reinforced cement roof and wall cladding; provides test procedures for the determination of resistance to wind force; appendix gives advice on the provision of roof ventilation.
AS 1562.1:2018 Design and installation of metal roof and wall cladding, Part 1: Metal 2018 cover

Standards Australia

Version:  Second Edition 2018.  (Current)
This Standard sets out requirements for the design and installation of self-supporting metal roof and wall cladding, subjected to out-of-plane external actions and in-plane thermally induced actions, permanent actions on walls and steep roofs and frictional drag of wind and snow actions.
SA HB 39:2015 Installation code for metal roof and wall cladding 2015 cover

Standards Australia

Version:  Third Edition 2015.  (Current)
Provides information and guidelines on the selection, performance and installation of metal roofing and wall cladding.
AS/NZS 2904:1995 Damp-proof courses and flashings 1995 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1995.  (Current)
Specifies the requirements for damp-proof course and flashing materials of the sheet membrane, strip and collar type for use in building construction.
AS 4440-2004 Installation of nailplated timber roof trusses 2004 cover

Standards Australia

Version:  Second Edition 2004.  (Current)
Specifies basic requirements for the bracing, connection and installation of nailplated timber roof trusses. Requirements are given for supporting structures, roof truss installation, roof bracing, truss connection and overhangs.