Search all content

1 - 10 of 17 results
AS/NZS 3013:2005 Electrical installations - Classification of the fire and mechanical performance of wiring system elements 2005 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2005.  (Current)
Sets out a classification scheme for wiring systems according to their resistance to the hazards of fire and mechanical damage.
AS 2444-2001 Portable fire extinguishers and fire blankets - Selection and location 2001 cover

Standards Australia

Version:  Sixth Edition 2001.  (Current)
Specifies the criteria for the selection of portable fire extinguishers and the requirements for their application, location and distribution.
AS/NZS 2904:1995 Damp-proof courses and flashings 1995 cover

Standards Australia/Standards New Zealand

Version:  First Edition 1995.  (Current)
Specifies the requirements for damp-proof course and flashing materials of the sheet membrane, strip and collar type for use in building construction.
AS 4440-2004 Installation of nailplated timber roof trusses 2004 cover

Standards Australia

Version:  Second Edition 2004.  (Current)
Specifies basic requirements for the bracing, connection and installation of nailplated timber roof trusses. Requirements are given for supporting structures, roof truss installation, roof bracing, truss connection and overhangs.
AS 4654.2-2012 Waterproofing membranes for external above-ground use, Part 2: Design and installation 2012 cover

Standards Australia

Version:  Second Edition 2012.  (Pending Revision)
Sets out a consistent and reliable approach to the design and installation of external waterproofing membrane systems.
AS 1670.3:2024 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 3: Fire alarm monitoring 2024 cover

Standards Australia

Version:  Fourth Edition 2024.  (Current)
The objective of this Standard is to achieve the reliable monitoring of fire detection and alarm systems (FDAS) installed in buildings by a remotely located monitoring service and to transfer required signals to a fire dispatch centre.
AS 1851-2012 Routine service of fire protection systems and equipment 2012 cover

Standards Australia

Version:  Third Edition 2012.  (Pending Revision)
Sets out requirements for inspection, testing, preventive maintenance and survey of fire protection systems and equipment.
AS 1288:2021 Glass in buildings - Selection and installation 2021 cover

Standards Australia

Version:  Fifth Edition 2021.  (Current)
Sets out procedures for the selection and installation of glass in buildings, subject to wind loading, human impact, and special applications. Glass strength is specified, based on the tensile stresses on the surface of the glass.
AS 1670.4:2024 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 4: Emergency warning and intercom systems 2024 cover

Standards Australia

Version:  Third Edition 2024.  (Current)
Specifies the design, installation and commissioning requirements for emergency warning systems and emergency intercom systems used in buildings for the evacuation of building occupants in the event of a fire or other type of emergency.
AS 3999:2015 Bulk thermal insulation - Installation 2015 cover

Standards Australia

Version:  Second Edition 2015.  (Current)
Sets out requirements on installing insulation in both new dwellings during construction and the retrofitting of insulation in existing buildings.