Search all content

1 - 10 of 17 results
AS 4055:2021 Amd 1:2024 Wind loads for housing 2024 cover

Standards Australia

Version:  First Edition 2024.  (Current)
AS 4055:2021 is amended as follows. The amendments should be inserted in the locations as instructed.
AS 1684.3:2021 Amd 1:2024 Residential timber-framed construction, Part 3: Cyclonic areas 2024 cover

Standards Australia

Version:  First Edition 2024.  (Current)
This Amendment applies to the following elements: Clauses 1.2, 1.4.2, 1.5, 1.11, 1.12, 4.2.2.3, 6.2.1.3 and 8.3.6.5, Figure 6.3, Table 8.18, 9.19 and 9.20, Bibliography.
AS 1684.2:2021 Amd 1:2024 Residential timber-framed construction, Part 2: Non-cyclonic areas 2024 cover

Standards Australia

Version:  First Edition 2024.  (Current)
This Amendment applies to the following elements: Clauses 1.2, 1.4.2, 1.5, 1.11, 1.12, 4.2.2.3, 6.2.1.3, 8.3.6.5, Figure 6.3, Tables 8.18, 9.19 and 9.20, Bibliography.
AS 1720.5:2015 Timber structures, Part 5: Nailplated timber roof trusses 2015 cover

Standards Australia

Version:  First Edition 2015.  (Current)
Sets out requirements for the design of nailplated timber roof trusses for residential and similar building applications in accordance with AS1720.1, AS4055 and the AS(/NZS)1170 series.
AS 1720.3:2016 Timber structures, Part 3: Design criteria for timber-framed residential buildings 2016 cover

Standards Australia

Version:  First Edition 2016.  (Current)
Part of the AS 1684 series, sets out the design methods, assumptions and other criteria, including uplift forces and racking pressures, suitable for the design of timber-framed buildings constructed within the limitations and parameters of, and using the building practice described in, AS 1684.2, AS 1684.3 and AS 1684.4.
AS 4666:2012 Insulating glass units 2012 cover

Standards Australia

Version:  Second Edition 2012.  (Current)
Sets out requirements and guidelines for the long term type testing, glazing, periodic manufacturing testing and other associated aspects to do with insulating glass units.
AS/NZS 4667:2000 Quality requirements for cut-to-size and processed glass 2000 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2000.  (Current)
Sets out the quality requirements for cut sizes of flat, transparent, clear ordinary annealed, tinted heat-absorbing, patterned and wired glass for general glazing and/or further processing.
AS 1288:2021 Glass in buildings - Selection and installation 2021 cover

Standards Australia

Version:  Fifth Edition 2021.  (Current)
Sets out procedures for the selection and installation of glass in buildings, subject to wind loading, human impact, and special applications. Glass strength is specified, based on the tensile stresses on the surface of the glass.
AS 3959:2018 Construction of buildings in bushfire-prone areas 2018 cover

Standards Australia

Version:  Fourth Edition 2018.  (Pending Revision)
Specifies requirements for the construction of buildings in bushfire-prone areas in order to improve their resistance to bushfire attack from burning embers, radiant heat, flame contact and combinations of the three attack forms.
AS 1428.1:2021 Design for access and mobility, Part 1: General requirements for access - New building work 2021 cover

Standards Australia

Version:  Sixth Edition 2021.  (Current)
Specifies the design requirements for new building work, as required by the National Construction Code (NCC) and the Disability (Access to Premises—Buildings) Standards (Premises Standards), to provide access for people with disabilities.