Search all content

AS/NZS 4994.2:2023 specifies requirements and give guidance for the selection, installation, use and dismantling of roof edge protection conforming to AS/NZS 4994.1. It covers temporary roof edge protection for persons working on roofs of buildings having roof slopes of not greater than 35° to the horizontal

AS/NZS 4994.1:2023 specifies requirements for the design, manufacture, installation and testing of temporary edge protection equipment used on roofs having slopes not greater than 35° to the horizontal and for other exposed edges, prior to the installation of the permanent walling materials.

Sets out the requirements for the design, manufacture, installation,re-positioning and dismantling of perimeter protection screens, of height 1 m and above, that are to be attached to formwork or to a permanent structure to provide edge protection for personnel and minimise falling objects during construction.

Specifies requirements for the design, construction and installation of electrical systems in boats that have a length of up to 50 m, and are designed for use on inland waters or at sea.

Sets out requirements for electrical installations associated with marinas supplied at low-voltage a.c. supply systems (i.e. exceeding 50 V a.c. but not exceeding 1000 V a.c.

Sets out a method for cable selection for those types of electrical cables and methods of installation that are in common use at working voltages up to and including 0.6/1 kV at 50 Hz a.c.

Specifies requirements for the design and installation of emergency lighting and illuminated emergency exit signage systems for buildings. Central battery, single point and self-contained systems are included.

AS NZS 3000 2018 (known as the Australian/New Zealand Wiring Rules) specifies requirements for the design, construction and verification of electrical installations, including the selection and installation of electrical equipment forming part of such electrical installations; part 1 provides provisions that constitute the minimum regulatory requirements for a safe electrical installation; part 2 provides work methods and installation practices that are ‘deemed to comply’ with the requirements of Part 1.

Specifies requirements for the design, installation, maintenance and testing of lightning protection on common structures, and for electrical and electronic systems within those structures for the protection of people and property from the hazards of lightning.

AS/NZS 3019 sets out the requirements for periodic assessment of existing electrical installations which are connected to a low voltage a.c. supply system (exceeding 50 V a.c. but not exceeding 1 000 V a.c.). Inspection and/or testing is intended, as far as reasonably practicable, to determine whether the installation and all its constituent equipment is in a safe condition for continued use.