Search all content

21 - 30 of 69 results
Fire Safety Verification Method Standard 2022 cover

Australian Building Codes Board

Version:  2022.  (Current)
Provides a process for engineering the design of fire safety Performance Solutions. The document provides the flexibility required to develop Performance Solutions while still maintaining the level of safety required by the NCC.
Bushfire Verification Methods Handbook

Australian Building Codes Board

Version:  2023.  (Current)
Assists in understanding the Verification Methods for building in bushfire prone areas in NCC Volumes One and Two (G5V1 in NCC Volume One and H7V2 in NCC Volume Two).
ABCB Housing Provisions Standard 2022 cover

Australian Building Codes Board

Version:  2022.  (Current)
Contains Deemed-to-Satisfy Provisions that are considered to be acceptable forms of construction that meet the requirements for complying with Parts H1 to H8 of NCC Volume Two.
NatHERS Heating and Cooling Load Limits Standard cover 2022

Australian Building Codes Board

Version:  2022.  (Current)
NatHERS compliance pathway for energy efficiency.
NCC 2022 residential energy efficiency: overview of provisions 2022 cover

Australian Building Codes Board

Version:  2022.  (Current)
The minimum level of thermal performance has increased to the equivalent of 7 stars under the Nationwide House Energy Rating Scheme (NatHERS).
AS 1735.11-1986 SAA Lift Code, Part 11: Fire-rated landing doors 1986 cover

Standards Australia

Version:  Third Edition 1986.  (Current)
Sets out requirements for fire-rated landing doors for retarding the passage of fire through openings in fire-rated liftwells; it applies where doors are required to have a fire-rating certificate.
AS 4254.1:2021 Ductwork for air-handling systems in buildings, Part 1: Flexible duct 2021 cover

Standards Australia

Version:  Second Edition 2021.  (Current)
Provides standardized requirements for the performance testing, manufacture and installation of flexible ducts.
AS/NZS 1720.4:2019 Timber structures, Part 4: Fire resistance of timber elements 2019 cover

Standards Australia/Standards New Zealand

Version:  First Edition 2019.  (Current)
The objective of this Standard is to provide a method for determining the fire resistance for structural adequacy and insulation of sawn timber, timber in pole form, plywood, laminated veneer lumber (LVL), and glued-laminated structural timber elements as an alternative to the test method specified in AS 1530.4.
AS/NZS 1546.1:2008 On-site domestic wastewater treatment units, Part 1: Septic tanks 2008 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2008.  (Current)
AS/NZS 1546.1 specifies performance requirements and performance criteria for septic tanks, technical means of compliance and provides test specifications that enable septic tanks to be manufactured to comply with the performance requirements and performance criteria.
AS 1546.4:2016 On-site domestic wastewater treatment units, Part 4: Domestic greywater treatment systems 2016 cover

Standards Australia

Version:  First Edition 2016.  (Current)
Specifies requirements for the performance, design, installation and testing of domestic greywater treatment systems (DGTS) and associated fittings for single domestic dwellings where adequate backflow protection is provided in accordance with AS/NZS3500.1.