Search all content

271 - 280 of 1159 results
AS/NZS 1891.4:2009 Industrial fall-arrest systems and devices, Part 4: Selection, use and maintenance 2009 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2009.  (Pending Revision)
Specifies requirements and sets out recommendations for the selection, safe use and maintenance of industrial fall-arrest systems and devices based on the use of safety harnesses, horizontal life lines and rails, fall-arrest devices, and associated lanyards, connectors, anchorages and fittings.
AS 1670.3:2024 Fire detection, warning, control and intercom systems - System design, installation and commissioning, Part 3: Fire alarm monitoring 2024 cover

Standards Australia

Version:  Fourth Edition 2024.  (Current)
The objective of this Standard is to achieve the reliable monitoring of fire detection and alarm systems (FDAS) installed in buildings by a remotely located monitoring service and to transfer required signals to a fire dispatch centre.
AS 3833:2024 The storage and handling of mixed classes of dangerous goods, in packages and intermediate bulk containers 2024 cover

Standards Australia

Version:  First Edition 2024.  (Current)
Provides minimum acceptable safety requirements for installations where more than one class of dangerous goods is stored and handled, whether in packages or intermediate bulk containers (IBCs) of up to 1.6 m3 capacity.
AS 1668.4:2024 The use of ventilation and airconditioning in buildings, Part 4: Natural ventilation of buildings 2024 cover

Standards Australia

Version:  Second Edition 2024.  (Current)
Sets out the requirements for the design of natural ventilation systems.
AS 1375:2023 Industrial fuel-fired appliances 2023 cover

Standards Australia

Version:  Fourth Edition 2023.  (Current)
Specifies requirements and safety principles for the design, installation and operation of industrial appliances that involve the combustion of gas or liquid fuel and the controlled generation of combustible vapours or combustible dusts.
AS/NZS 4994.3:2023 Temporary edge protection, Part 3: Installation and dismantling for edges other than roof edges 2023 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2023.  (Current)
AS/NZS 4994.3:2023 specifies requirements and gives guidance for the selection and installation of edge protection conforming to AS/NZS 4994.1, for persons working near an opening in a floor, or near a platform edge or floor edge prior to the installation of the permanent walling materials.
AS ISO 717.2:2024 Acoustics - Rating of sound insulation in buildings and of building elements, Part 2: Impact sound insulation 2024 cover

Standards Australia

Version:  Second Edition 2024.  (Current)
AS ISO 717.2:2024 identically adopts ISO 717 2:2020, which provides a method whereby the frequency dependent values of impact sound insulation of building elements and in buildings (from both laboratory and field measurements) can be converted into a single number to characterize the acoustical performance
AS/NZS 4994.2:2023 Temporary edge protection, Part 2: Roof edge protection - Installation and dismantling 2023 cover

Standards Australia/Standards New Zealand

Version:  Third Edition 2023.  (Current)
AS/NZS 4994.2:2023 specifies requirements and give guidance for the selection, installation, use and dismantling of roof edge protection conforming to AS/NZS 4994.1. It covers temporary roof edge protection for persons working on roofs of buildings having roof slopes of not greater than 35° to the horizontal
AS ISO 717.1:2024 Acoustics - Rating of sound insulation in buildings and of building elements, Part 1: Airborne sound insulation 2024 cover

Standards Australia

Version:  Second Edition 2024.  (Current)
AS ISO 717.1:2024 identically adopts ISO 717 1:2020, which provides a method whereby the frequency dependent values of airborne sound insulation of building elements and in buildings (from both laboratory and field measurements) can be converted into a single number to characterize the acoustical performance
AS/NZS 4994.1:2023 Temporary edge protection, Part 1: General requirements 2023 cover

Standards Australia/Standards New Zealand

Version:  Second Edition 2023.  (Current)
AS/NZS 4994.1:2023 specifies requirements for the design, manufacture, installation and testing of temporary edge protection equipment used on roofs having slopes not greater than 35° to the horizontal and for other exposed edges, prior to the installation of the permanent walling materials.